Oilcloth is awesome. It's a special type of fabric (vinyl with a cotton mesh backing) that is extremely durable. It's waterproof and can be easily wiped clean, making it PERFECT for kitchen projects.
This is a great 'starter project' for working with oilcloth. Let's get started, shall we?
Here's what you'll need to make an Oilcloth Binder Jacket:
- 3 Ring Binder (I used a 2 inch width)
- 1/2 yard of oilcloth
- Yard Stick or Tape Measure
- Pencil
- Painters Tape (Masking Tape would also work)
- Sewing Machine and Coordinating Thread
First, open your binder out flat and measure from edge to edge. We'll call this the width.
Add 10 inches to the width of the binder.
Next, measure your binder from top to bottom. Let's call this the height.
Add 1/2 inch to the height of the binder.
So, now you will use your yard stick to cut out a rectangle of oilcloth that is Width + 10 inches and Height + 1/2 inch. For example if your binder was 26 inches wide and 12 inches tall, you would cut a rectangle that is 36 inches by 12 1/2 inches. Make sense?
Once you've cut your rectangle for the Binder Jacket, it's time to get ready to sew! Lay the rectangle flat with the wrong side facing up. Measure 5 inches from each end of the oilcloth.
Now tape the flap down using the painter's tape. Pins would make holes in the oilcloth, so we'll be using tape instead.
Do this to both sides.
Now we're ready to sew! You'll need to make a little adjustment to your sewing machine before you sew with oilcloth. The vinyl is a bit sticky and would cling to the metal of the presser foot.
Using a 1/4 inch seam allowance, sew along the bottom and top edges of the folded-over-five-inch-flap. The sewing is a little bit tough. I had to push and pull the fabric while I was sewing because the oil cloth is so thick. It's possible, though. Don't give up! Onward and upward!
Now, you can slip the Binder Jacket onto your binder.
Ta-to the-Dah.
Fancy schmancy new binder.
